HMT 2522 OS tractor

This model is bodied with the 4 Stroke, Direct injection, Water Cooled HMT engine. It has a displacement volume of 1560 cc with a contracted band type parking brake.

The capacity of its fuel tank is 40.0 liters along with ground P.T.O. rpm 210 to 1075 available through gearbox


View Technical Specification of HMT 2522 OS

Specifications Engine Type 4 Stroke, Direct injection, Water Cooled No. OF Cylinders 2 H.P. Range 25 H.P. Category Bore/Stroke 95 mm / 110 mm Displacement Volume 1560 CC Compression Ratio 17.4:1 Rated RPM 2100 Air Cleaner Two stage filtration, oil bath with cyclone type pre-cleaner and dust collector Cooling System Forced water circulation type with thermostatic control Clutch Dual, Dry friction plates, 1st for tractor travel, 2nd for P.T.O. shaft independently Steering Recirculating Ball Type Foot Brake Hydraulic, Internal expanding shoe type, with a system of individual wheel braking Parking Brake Hand-operated, Mechanical, Contracting band type P.T.O. Shaft Operation Independent Standard rpm 545 at rated engine rpm. Ground P.T.O. rpm 210 to 1075 available through gearbox Hydraulic Powerlift System Zetormatic hydraulic system with automatic Draft, Position and unique Mixed Control. Provision for external circuit for double acting cylinders. Gear pump output 20 litres/minute at 120 kg/cm2 pressure. Lift working pressure 150 kg/cm2 Lifting force at link ends 500 kg Electircal System One no. Storage battery 12 volt-88 Ah. Self - starter Motor, Dynamo with regulator for battery charging. Fuel Tank 40.0 litres Engine Sump 5.0 litres Cooling System 7.5 litres Air Cleaner 0.4 litre Steering 1.6 litres Portals (Each) 1.25 litres F.I. Pump 0.2 litre Tyres Front 5.00-15/6.00- 16(6PR) Tyres Rear 8.00-18 Length 2825 mm Width 1350 mm Wheel base 1485 mm Overall height upto Steering wheel 1385 mm Ground clearance 240 mm Min. turning radius 2400 mm +100 mm (with braking one wheel) Weight 1500 kg